100kg Microlift
The larger capacity Microlift is ideal for busy catering environments, pubs, clubs and restaurants and industrial applications. Two standard lift car sizes are offered, in either dumbwaiter form with counter serving rise and fall shutters, or service lift form with floor level serving hinged doors. Other sizes are available as special options.
| MODEL | CAPACITY | CAR | ENTRANCE | SERVING HEIGHT (variable) | SHAFT | PIT DEPTH | HEAD ROOM |
||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| WIDTH | DEPTH | HEIGHT | WIDTH | HEIGHT | WIDTH | DEPTH | |||||
| 100A | 100kg | 720 | 720 | 1000 | 620 | 970 | 800 | 1000 | 1000 | - | 2800 |
| WITH RISE AND FALL SHUTTERS | |||||||||||
| 100A | 100kg | 720 | 720 | 1000 | 550 | 890 | FLOOR | 1000 | 1000 | 350* | 2000 |
| WITH HINGED DOORS | |||||||||||
| 100B | 100kg | 820 | 820 | 1200 | 720 | 1170 | 800 | 1100 | 1100 | - | 3000 |
| WITH RISE AND FALL SHUTTERS | |||||||||||
| 100B | 100kg | 820 | 820 | 1200 | 600 | 1090 | FLOOR | 1100 | 1100 | 350* | 2200 |
| WITH HINGED DOORS | |||||||||||
All Dimensions are nominal and in mm.
Note: Some of the dimensions can be varied to suit your individual requirements by modification of stock models or by special manufacture - please contact us for details.
Entrances are available on three sides (A,B & C) on all floors.
* For 100kg lifts with hinged door option, if floor level serving height is required then a pit will be necessary. A reduction in the pit depth is possible - please contact us for details.
Safe Maintenance Access
A service engineer must be able to access the motor compartment in a safe manner. The lift owner must provide a safe means of access up to the motor compartment.
Access doors to the motor compartment are required on one or two faces of the lift shaft, depending on the configuration of the lift. The doors must be hinged and lockable.
Our builders work drawings contain more detailed information on this topic but please do not hesitate to contact us if you have any questions.
For further advice please contact us on
01264 351922.
A microlift is an essential addition in the busy kitchen of a large restaurant.
SPECIFICATION
Car: Constructed in mild steel, finished in grey baked enamel with a stainless steel base and a removable stainless steel shelf. The car can also be finished in stainless steel.
Speed: 0.35m/s.
Entrances: High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked enamel or stainless steel. Hinged doors are available as an option on all models.
Car entrance protection: To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance protection as standard. This protects goods from falling whilst the lift is in motion.
Entry choice: Up to three entrances can be fitted on each floor.
Control: Fully automatic push button control with call and despatch facilities at each entrance for ease of use.
Indicators: “Lift arrival”, “lift occupied” and "lift position" indicators are fitted at each entrance, together with an audible lift arrival buzzer.
Travel: Up to 12 stops over a total distance of 36m of travel.
Mounting: The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or “load-bearing” lift shaft. For details, please ask for our builders work details.
Motor: Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system ensure electrical consumption is minimal.
Safety: Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations 1992, also known as the Machinery Directive and EN 81-3 where applicable.
Additional options include: Heated car, additional and/or heated shelves, intercom system and load weighing.